Scientific SMG2000 Series, User Manual

Page: 114 / 150

Scientific
114/150 User manual SMG2000
2.13.7 Sync Output
The generator provides Sync output through the [Aux In/Out] connector at the
rear panel. When the synchronization is on, the port can output a CMOS
signal with the same frequency as basic waveforms (except Noise and DC),
arbitrary waveforms, and modulated waveforms (except external modulation).
Figure 2-71 Sync Output Interface
Table 2-39 Menu Explanations of Sync Output
Function
Menu
Settings Explanation
Off Close the sync output
State
On Open the sync output
CH1 Set the sync signal of CH1.
Channel
CH2 Set the sync signal of CH2.
Done Save the current settings and return to the Utility menu.
Cancel
Give up the current settings and return to the Utility
menu.
Sync Signals of Different Waveforms
：
Basic Waveform and Arbitrary Waveform
1) When the frequency of the waveform is less than or equal to 1MHz, the
sync signal is a Pulse with 500ns pulse width and the same frequency as
the waveform.