Scientific SMG2000 Series, User Manual

Page: 130 / 150

Scientific
130/150 User manual SMG2000
3.8 Example 8: Generate a Burst Waveform
Generate a burst waveform with 5 cycles. The burst period is 3ms. Use
internal trigger and 0° start phase.
Steps:
Set the burst function.
Press Waveforms, and choose the sine waveform as the burst function.
Set the frequency, amplitude and offset.
1. Press Frequency/Period and choose Frequency which will display in blue
color. Input ‘10’ from the keyboard and choose the unit ‘ kHz’ to set the
frequency to 10kHz.
2. Press Amplitude/HighLevel to choose Amplitude which will display in blue
color. Input ‘ 4’ from the keyboard and choose the unit ‘ Vpp’ to set the
amplitude to 4Vpp.
3. Press Offset/LowLevel to choose Offset which will display in blue color.
Input ‘ 0’ from the keyboard and choose the unit ‘ Vdc’ to set the offset to
0Vdc
Set the burst mode.
Press Burst
→
NCycle, choose N-Cycle Mode. The default setting of
the source is internal.
Set the burst period.
Press Burst Period, input ‘3’ from the keyboard and choose the unit ‘ms’ to
set the burst period to 3ms.
Set the start phase.
Press Start Phase, input ‘0’ from the keyboard and choose the unit ‘°’ to
set the start phase to 0°.