WebSTAR DPX2203C and EPX2203C VoIP Cable Modem User’s Guide
10
Back Panel Description
The following illustration shows the description and function of the back panel components on the DPX2203C and
EPX2203C.
1
2
3
4
5
6
T11672
CABLE
USB
ETHERNET
TELEPHONY
LINE1 LINE2
15VDC
POWER
RESET
IMPORTANT:
Do not connect your PC to
both
the Ethernet and USB ports at the same
time. Your modem will not function if both the Ethernet and USB ports are connected to
your PC at the same time.
1 CABLE
—F-Connector connects to an active cable signal from your cable
service provider
2 USB
—12 Mbps USB port connects to the USB port on your PC
3 ETHERNET
—RJ-45 Ethernet port connects to the Ethernet port on your PC or
your home network
4 LINE1/LINE2
—RJ-11 telephone ports connect to home telephone wiring to
conventional telephones or fax machines
5 RESET
—Activating this switch resets the unit to factory default values and
reboots the cable modem
6 POWER
—Connects the cable modem to the DC output of the AC power
adapter that is provided with your cable modem
CAUTION:
Avoid damage to your equipment. Only use the AC power adapter
and power cord that is provided with your cable modem.
CAUTION: The Reboot EMTA button is for maintenance
purposes only. Do not use unless instructed to do so by your cable
or telephone service provider. Doing so may cause you to lose any
cable modem settings you have selected.
