www.science-image.com
8/9
9.4
9.5 Restart
The first line of the OLED screen of the product will display the working mode, "NDI Encoder" is on Encoding, and "NDI Decoder" is on Decoding,
as shown in the figure below.
Click the Remote restart button , and the NDI box will restart the system.
①Camera type
Select the type of camera and click Connect.
②Camera adjustment
Select the type of camera and click Connect.
10.1 Camera Setting
10. Control
NDI Encoder
NDI: SCIENCEIMAGE
VI: 1920 1080 p60
192.168.1.24
NDI Decoder
NDI: SCIENCEIMAGE
VI: 1920 1080 p60
192.168.1.24
Working mode switch
Click [System] to enter the system setting page
Select "Encoder" or "Decoder" and click the [Switch NDI Mode] button to immediately switch to the corresponding mode.
If the current mode is already required, there is no need to switch.
