7.2
7.3
7.5 Set Tally Light
7.4
7.6
7.7
The tally light can be turned on or off at any time (there are three display states: yellow/standby, green/pre-monitoring, red/program).
www.science-image.com
5/9
7.1 Modify the NDI stream name in the encoding state
If the device is used as an encoder, you need to modify the NDI stream name. The NDI stream name must be unique locally, otherwise
software such as NDI Studio Monitor may not be recognized. After the modification, click the [Apply] button below to take effect in
real time. See the modification result on the OLED screen of the device.Examples are as follows:
Set screen aspect ratio
Supports five screen aspect ratio settings: source aspect ratio, 4:3, 16:9, 16:10, square.
Set frame rate
Support 4 kinds of frame rate settings: source frame rate, 1/2 frame rate, 1/3 frame rate, 1/4 frame rate.
Set bitrate (Bandwidth)
Adjusting the code rate of the video source can save network bandwidth without affecting the picture quality.
Set NDI encoder volume
"Encoder volume" adjusts the volume of the video source encoded by the encoder, such as the volume of the picture in the NDI St
Logo background image upload streaming
If it is in the encoding state, the user can choose to set the LOGO background picture as a picture stream according to actual
Up streaming background image
displayed in NDI Studio Monitor
