www.science-image.com
Reading before use
If you find that some functions are unavailable in future use, you need to check the following to find out whether it is caused by improper operation or settings:
1.
This product is an audio and video codec conversion device, which only supports streaming and pushing in the local area network, but not on the Internet;
2.
If you find that the video stream is not detected in NDI Studio Monitor, please check whether the stream name of the encoder has been modified.
Multiple identical stream names may cause NDI Studio Monitor to fail to detect;
3.
If you see the background picture of the logo up streaming (the background picture set on the [Video] page of the encoder) on the encoder end
through the software that supports NDI, and you cannot input the source, please click the right side of the [Video] page on the web end.
Click the [Stop Now] button on the side;
4.
If there is a login failure due to the upgrade, please clear the browser cache and refresh the page and log in again;
5.
If you find that the web page cannot be accessed, please check whether the IP address of the PC or mobile phone and the IP address of the NDI® HD mini
are in the same network segment;
If you power on the device and the screen displays the IP address as "192.168.8.8", it means that your box has enabled the DH CP function means
automatic setting of IP address mode and there is no router in the connected link. At this time, you only need to Add a router to the road, and then power off
and restart the device to redistribute it to the IP with routing; if you only have a switch, you need to adjust the IP address information of your local PC or
mobile phone to the network segment of "192.168.8.1", Then enter the webUI of this device. After entering, you need to set the IP address mode to manual mode,
enter the IP address information, and keep it in the same LAN segment as the local PC or mobile phone.