Page 17
Bottom Bracket Replacement
1. Remove the rubber chainguard cap.
2. Remove the screws from the user right chainguard (inset).
3. Use a Phillips screw driver and 5mm hex key to remove the
screws securing the user left Chainguard to the bike.
4. Rotate the chainguard downward to remove
5.
Walk the belt/chain off of the bike unless replacing the user
left side crank arm only.
NOTE:
The process is the same for both belt and chain-
equipped bikes.
6. Use a 8mm hex key to remove both the right (shown) and
left side crank arm bolts.
