Technical Procedure
Page 3
637-8642 Rev. A
7. Remove the tension bolt covers from the front of the bike
8. Using a 10mm deep socket, remove the left and right-side
tension screws from the front forks of the bike.
TECH TIP:
If an accessory (such as the Body Bar Holster) is lim-
iting access to the tensioning nuts, use a 6mm allen key with a
10mm deep socket on the end of it to work within the clearance
available.
9. Carefully move the flywheel toward the rear of the bike and
down to drop the flywheel free from the frame.
10. Once the flywheel is free from the bike, install the new gen-
erator belt/band onto the left side flywheel pulley.
11. Reinstall the flywheel
