Schweizer eMag 43 HD, User Manual

Page: 13 / 104

13
GB GB
Charging rechargeable batteries
1. Plug one end of the power adapter into the
e
Mag 43 HD and the other end into a standard AC outlet (1).
2. The LED indicator (2) blinks green to show that the rechargeable batteries (NiMH) are charging.
For more information on
LED Indicator Battery Status
–> Refer to page 11.
3. When the battery is charged, the LED indicator stops blinking and glows a steady green. Unplug the
power adapter from the e Mag 43 HD. The LED Indicator “Battery Status” turns off.
4. You can now use the e Mag 43 HD continuously for approx. 2 hours. When the battery/rechargeable
battery is almost drained, the LED indicator “Battery Status” flashes red. Connect the power adapter
and plug it in to recharge the rechargeable battery (or insert new batteries).
Note: If you wish to replace the supplied rechargeable batteries, replace all four at the same time with
1000 mAh NiMH rechargeable batteries with a MAXIMUM charging current above 250 mA.
2
1