39
STS
-
JZ
-
F / IQ
-
F I&O Manual Z83.20
-
2016
IM101220
RD: APR 2019
RL: 20C
NOTE: All hangers must be installed with the cavity side facing the burner end of the system
-
Except the vent end hanger
-
the hanger cavity side at vent end of the must face the vent.
FIGURE 22 REFLECTOR EXTENSIONS (OPTIONAL
-
IF REQUIRED )
1.
Reflector extensions may be installed on
one side or both sides of the reflector
2.
Reflector extensions are
116” (295
cm)
long
3.
Holes (3) for
“
S
”
hooks are located
2.25” (5.7
cm) from each end and one at
the center of the reflector extension
4.
Drill
1/4” (7
mm) holes in the reflector
3/4” (2
cm) up from the bottom edge of
the reflector to align with the 3 holes in
the top of the reflector extension
Reflector extensions
may be installed one
or both sides
Insert
‘
S
’
hook
from top and
rotate
5.
Insert
“
S
”
hook down through hole in the top of the reflector extension
6.
Rotate
“
S
”
hook approx. 90°, and insert into hole in reflector
7.
Settle reflector extension into place
