infraSchwank D / calorSchwank D - shape U
18
Version
004
infr
a_
calor
D
shape
U Au
str
a
lia
43/13
Te
chni
cal spe
c
ification
su
bject to chan
ge
Assembly
infraSchwank D / calorSchwank D 30U
Tools you need
• hexagonal wrench or ratchet
(width: 10, 13)
• socket wrench (width: 7 and 8)
hand rivet tool, drill machine,
drill
4.9mm
Note before mounting
Note the distance measures of suspension brackets.
Flanges are mounted with flange packing
(each 4 screws/washers/lock washers/nuts M8).
Start mounting the heater at the turnaround box
connection.
Turn welding line of the tubes to the side.
Tube with turbulator
(with paint mark
) has to be
mounted behind the turnaround box (flow direction).
The paint mark showing to the turnaround box!
Supporting sleeve for first flange connection:
Insert half of the supporting sleeve into first heater
tube (slot on top). Drill Ø 4.9mm hole through the
tube and sleeve and fix it by rivet. Mount the second
tube and fix the sleeve by the rivet as well. Fix the
rivets always in the opposite position lateral to the
tube. Use only stainless rivets.
Tube bars have to be fixed by nuts / 3D washers / lock
washers M8 on the suspension brackets.
Start the reflector mounting at the turnaround box
connection. Reflector will be fixed on the turnaround
box connection by self-tapping screws. For insulated
reflectors (calorSchwank D) the reflector end with
notch on sides shows to the turnaround box.
The other reflector endings will be shoved under the
clips of the suspension brackets.
Reflectors will be jointly fixed by 3x M 5 screws and
self-locking nuts.
Reflector and front plate have to be fixed by self-
tapping screws.
Mounting of burner unit with valve on the top.
Fig. 12: Mounting of infraSchwank D / calorSchwank D 30U
(all dimensions in mm)
Indirect flue into the room (Type A3):
Flue gas diverter code no. 126 70180
Note that the flue gas diverter is mounted in a
position so that the flue gas is diverted from the
burner.
Accessory:
Flue gas adapter code no. 126 7035 0
Adapter is mounted at the end of the tube with
gasket.
Flue gas connection (Type B23, C):
version stainless steel:
Note that the flue gas flexible pipe is mounted at the
end of the tube with gasket.
Supporting sleeve
4 rivets (stainless steel)
4,8mm
hole to drill
4,9mm
Flue gas diverter
Summary of Contents for calorSchwank D 15U
Page 1: ...BROCSCH115 1...
