Schwank calorSchwank D 15U, Technical Manual

Page: 17 / 41

infraSchwank D / calorSchwank D - shape U
17
Version
004
infr
a_
calor
D
shape
U Au
str
a
lia
43/13
Te
chni
cal spe
c
if
ication
su
bject to chan
ge
Version
004
infr
a_
calor
D
shape
U Au
str
a
lia
43/13
Te
chni
cal spe
c
if
ication
su
bject to chan
ge
Version
004
infr
a_
calor
D
shape
U Au
str
a
lia
43/13
Te
chni
cal spe
c
if
ication
su
bject to chan
ge
Assembly
infraSchwank D / calorSchwank D 20U
Tools you need
• hexagonal wrench or ratchet
(width: 10, 13)
• socket wrench (width: 7 and 8)
Note before mounting

Note the distance measures of suspension brackets.

Flanges are mounted with flange packing
(each 4 screws/washers/lock washers/nuts M8).

Start mounting the heater at the turnaround box
connection.

Turn welding line of the tubes to the side.

Tube with turbulator (with paint mark ) has to be
mounted behind the turnaround box (flow direction).
The paint mark showing to the turnaround box!

Tube bars have to be fixed by nuts/3D-washers/lock
washers M8 on the suspension brackets.

Start the reflector mounting at the turnaround box
connection with the longest reflector L=3000mm.
Reflector will be fixed on the turnaround box
connection by self-tapping screws. For insulated
reflectors (calorSchwank D) the reflector end with
notch on sides shows to the turnaround box.

The other reflector endings will be shoved under the
clips of the suspension brackets.

The short reflector L=1500mm is mounted at the
front of the heater.

Reflectors will be jointly fixed by 3x M 5 screws and
self-locking nuts.

Reflector and front plate have to be fixed by self-
tapping screws.

Mounting of burner unit with valve on the top.
Fig. 11: Mounting of infraSchwank D / calorSchwank D 20U
(all dimensions in mm)

Indirect flue into the room (Type A3):
Flue gas diverter code no. 126 70180
Note that the flue gas diverter is mounted in a
position so that the flue gas is diverted from the
burner.
Accessory:
Flue gas adapter code no. 126 7035 0
Adapter is mounted at the end of the tube with
gasket.

Flue gas connection (Type B23, C):
version stainless steel:
Note that the flue gas flexible pipe is mounted at the
end of the tube with gasket.

Flue gas diverter