Schwamborn STA 300, User And Maintenance Book, Page: 16 / 20

14.
TROUBLESHOOTING
15. USE LONGBAG
1.
Close the bag with two
stripes. 2.
Cut between the two
stripes
.
3.
Pull at the end of Longbag
to get a new bag.
The dust and the particles are collected in a bag placed in the container under the hopper.
This system called Longbag consists in a 20 meters plastic tubular from which are obtained 20/30 bags of different
weights and dimensions. Once finished or damaged, the tubular must be replaced by a new refill.
The operations below described must be carried out when machine is turned off.
Pre-separator STA 300 is designed and manufactured for a severe environments and tasks, but the user must note
that the machine components must be protected from knocks and blows. Sealing connections are carefully chosen
for the environment of the operator. Therefore, the machine must be handled with care if it is to work for many
years.
Poor suction
►
Damage to the hose ► Change hose
► Top cover loose ►
Fasten the cover
► Dirt in the flap
►
Clean the flap
(
Attention:
use protective equipment!
)
►
Sealing defective
►
Change current seal