Schwamborn STA 300, User And Maintenance Book, Page: 15 / 20

11. MOUNTING OF PARTS
Connect one hose to the machine and the other to the
vacuum cleaner.
12. USING THE PRE-SEPARATOR
THE MACHINE IS INTENDED FOR PRE-SEPARATING DRY,
NOT COMBUSTIBLE DUST.
Machine
Vacuum cleaner
The pre-separator must be attached to a vacuum cleaner with right capacity.
When the vacuum cleaner is started, the dust-laden air is then sucked through the inlet valve at high speed via the
suction hose. The air is slowed down by the cyclone and coarse dust particles are separated out, partly by
centrifugal force and partly by gravity. Air and finer particles then lift through the tank and through the hoses
attached to the vacuum cleaner.
The separated dust accumulates in the cyclone until the vacuum cleaner is switched off, when it drops through the
bottom flap into the plastic bag.
13. CLEANING
• Avoid cleaning with high a pressure cleaner. If this is necessary, do not direct at the openings on the machine.
• Before moving the machine from the work area, the machine must be cleaned.
• All other equipment must be regarded as contaminated and be treated thereafter.
• If possible, use a special suitable room.
• Proper personnel protective equipment must be used.
• After service, all parts which are contaminated must be correctly disposed of in plastic bags according to all
regulations.
• If the vacuum cleaner has to be used for other purposes, it is extremely important that the vacuum cleaner is
cleaned, to avoid the spread of hazardous dust.
WHEN CLEANING AND SERVICING THE MACHINE,
THE MACHINE MUST BE DISCONNECTED FROM THE VACUUM CLEANER.