SCHUNK WSG Series, Software Manual

Page: 23 / 28

Fieldbus Monitor
01.00|WSG |en 23
Appendix A: Status Codes
Status
Code
Symbol name Description
0 E_SUCCESS No error occurred, operation was successful
1 E_NOT_AVAILABLE Function or data is not available
2 E_NO_SENSOR No measurement converter is connected
3 E_NOT_INITIALIZED Device was not initialized
4 E_ALREADY_RUNNING The data acquisition is already running
5 E_FEATURE_NOT_SUPPORTED The requested feature is currently not available
6 E_INCONSISTENT_DATA One or more parameters are inconsistent
7 E_TIMEOUT Timeout error
8 E_READ_ERROR Error while reading data
9 E_WRITE_ERROR Error while writing data
10 E_INSUFFICIENT_RESOURCES No more memory available
11 E_CHECKSUM_ERROR Checksum error
12 E_NO_PARAM_EXPECTED A Parameter was given, but none expected
13 E_NOT_ENOUGH_PARAMS Not enough parameters for executing the command
14 E_CMD_UNKNOWN Unknown command
15 E_CMD_FORMAT_ERROR Command format error
16 E_ACCESS_DENIED Access denied
17 E_ALREADY_OPEN Interface is already open
18 E_CMD_FAILED Error while executing a command
19 E_CMD_ABORTED Command execution was aborted by the user
20 E_INVALID_HANDLE Invalid handle
21 E_NOT_FOUND Device or file not found
22 E_NOT_OPEN Device or file not open
23 E_IO_ERROR Input/Output Error
24 E_INVALID_PARAMETER Wrong parameter
25 E_INDEX_OUT_OF_BOUNDS Index out of bounds
26 E_CMD_PENDING No error, but the command was not completed,
yet. Another return message will follow including a
status code, if the function has completed.
27 E_OVERRUN Data overrun
28 E_RANGE_ERROR Range error
29 E_AXIS_BLOCKED Axis blocked
30 E_FILE_EXISTS File already exists
5.1