Interface
01.00|WSG |en
7
Configuration
To use the WSG’s PROFINET interface, it must first be enabled via
the device’s web interface. Further configuration options can be
set either directly on the WSG using its web interface to change IP
address or PROFINET device name. However, PROFINET also allows
various configuration options to be set remotely using an engi-
neering tool like e.g. Siemens STEP7. Please refer to the
documentation of your engineering tool.
NOTE
Changing the WSG’s IP address settings remotely using an engi-
neering tool. The device’s web interface might become inaccessi-
ble if the PROFINET connection gets lost.
It is strongly recommended to change these settings only via the
WSG’s web interface.
Further information is contained in the assembly and operating
manual of the gripper.
2.2.2
