SCHUNK VERO-S NSR 138, Translation Of Original Operating Manual

Page: 17 / 60

Assembly
6 Assembly
Pre-assembly measures
Carefully lift the product out of the packaging (e.g. with suitable
lifting equipment).
CAUTION
Risk of injury due to sharp edges and rough or slippery surfaces
Wear personal protective equipment, particularly protective
gloves.
Check that the delivery is complete and that there is no transport
damage.
Assembly of the robot coupling
Assembly, dismantling and modification work on the robot
coupling may only be carried out by specialist personnel.
Disconnect the energy supply lines and ensure that there is no
residual energy in the system when performing assembly,
modification, maintenance, or adjustment work.
The hoses and cables required for the energy supply for the robot
coupling must be laid and protected suitably on the pallet
handling.
Wear protective clothing (gloves, protective shoes).
WARNING
Risk of injury due to dropping the quick-change pallet system
during transport
Transport the system with care.
Use a crane and/or a trolley for transporting the system.
WARNING
Risk of injury due to crushing
Install the quick-change pallet system carefully.
Do not place any limbs into the gaps or between the clamping
pallet and the machine.
17 01.00 | NSR 138 / PKL 138 | VERO-S Robot Coupling for Pallet Handling | en |
1509378