Operation
04.00 | Clamping device SVP-2D | Assembly and Operating Manual | en | 0289025
23
Handheld scanner
Data Matrix Code
Toolholder TRIBOS
• Fully automatic detection of the toolholder type and the
clamping-Ø via DataMatrix-Code.
• The
handheld scanner CR6000 with power cord
is connected to
the RS 232 interface.
• Hold the scanner steadily and slightly inclined (angle 10° - 20°)
towards the DataMatrix-Code.
When using the handheld-scanner the manual user interface (I-
Drive) has to be lock with a lock code. The lock code can be found
on the TRIBOS pressure table
TRIBOS pressure table
[
}
26]. To
lock, scan the lock code with the handheld scanner.
Now, only the toolholder specific DataMatrix-Codes can be
scanned with the handhold scanner. At the manual user interface,
no pressure setting can be made. But the P+ option for fine
adjustment of the pressure (+1 bar or + 5 bar steps) can still be
used.
If no scanner is used, the manual user interface must be unlocked
(delivery state). The unlock code can be found on the TRIBOS
pressure table
TRIBOS pressure table
[
}
26]. After scanning the
unlock code, only manual operation is active. Scanning the code
with the handheld scanner is no longer possible.
≤ 100 bar:
P+ Option
> 100 bar:
Step 5 bar
Range + 20 bar
Step 1 bar
Range +5 bar
Normal operation
Quick selection
(Mini/RM-operation)
Step 1 bar
Range +5 bar
