Operation
04.00 | Clamping device SVP-2D | Assembly and Operating Manual | en | 0289025
21
• Setting pressure value
– Use the (P) key to select the desired target value between
"S0" and "S9".
– Use the arrow keys to adjust the pressure and confirm using
the (P) key.
– The pressure value is stored and the next highest target
value appears for entering.
– Use (OK + ↑) to delete the target values "S0" – "S9".
• After pressure build-up the actual pressure P is displayed.
• By pressing the (↑) key several times, the target pressure can
be changed in specifed range.
• Switch on/off the display
– Switch off the display: Press and hold the key (P) for 3
seconds.
– Switch on the display: Press key (OK).
6.2.1 Example for pressure input: 280 bar
Operation
Keystroke
Activate pressure input
Press 1 x key »P« (F 1)
10th digit selection with cursor
Press 1 x key »←« (F 3)
Adjust 10th digit
Press 8 x key »↑« (F 4)
100th digit selection with cursor
Press 1 x key »←« (F 3)
Adjust 100th digit value
Press 2 x key »↑« (F 4)
Confirm value ”280”
Press 1 x key »OK« (F 2)
6.3 Handheld scanner for DataMatrix-Code
The handheld scanner retrofit kit is available as accessory at
SCHUNK:
Handheld scanner for
ID number
SVP-2D with software version 1.3
0201756
SVP-2D from software version 1.4
0201758
