SCHUNK ROTA EP 380-127, Assembly And Operating Manual, Page: 72 / 73

Appendix on Declaration of Incorporation, as per 2006/42/EC,
annex II, No. 1 B
72 02.00|0889073_ROTA TB-TBS-EP |en
Appendix on Declaration of Incorporation, as per
2006/42/EC, annex II, No. 1 B
1. Description of the basic safety and health protection requirements, as per 2006/42/EC,
annex I, that apply to and are fulfilled for the scope of the partly completed machine:
Product designation ROTA TB/TB-LH/TBS/TBS-LH/EP/EP-LH pneumatic chuck
Type designation ROTA TB 400-115; 400-140; 470-185; 500-160; 500-205; 500-230; 600-275; 610-260; 630-265; 630-
310; 630-325; 630-330; 800-365; 800-375; 800-395; 800-410; 1000-534. ROTA TB-LH 400-140; 470-
185; 500-205; 500-230; 600-275; 610-260; 630-265; 630-275; 630-325; 850-375; 1000-560; 1200-
640. ROTA TB-LH-LC 850-375. ROTA EP 380-127; 460-165; 460-185; 500-260. ROTA EP-LH 460-165;
460-185; 500-260; 610-265.
ID number 0818001; 0818002; 0818011; 0818012; 0818050; 0818122; 0818131; 0818017; 0818032; 0818040;
0818041; 0818240; 0818005; 0818004; 0818015; 0818016; 0818019; 0818051; 0818125; 0818026;
0818135; 0818141; 0818014; 0818035; 0818003; 0818006; 0818007; 0818052; 0818008; 0818009;
0818023; 0818018
To be provided by the System Integrator for the overall machine
⇓
Fulfilled for the scope of the partly completed machine
⇓
Not relevant
⇓
1.1 Essential Requirements
1.1.1 Definitions X
1.1.2 Principles of safety integration X
1.1.3 Materials and products X
1.1.4 Lighting X
1.1.5 Design of machinery to facilitate its handling X
1.1.6 Ergonomics X
1.1.7 Operating positions X
1.1.8 Seating X
1.2 Control Systems
1.2.1 Safety and reliability of control systems X
1.2.2 Control devices X
1.2.3 Starting X
1.2.4 Stopping X
1.2.4.1 Normal stop X
1.2.4.2 Operational stop X
1.2.4.3 Emergency stop X
1.2.4.4 Assembly of machinery X
1.2.5 Selection of control or operating modes X
1.2.6 Failure of the power supply X
1.3 Protection against mechanical hazards
1.3.1 Risk of loss of stability X
1.3.2 Risk of break-up during operation X
1.3.3 Risks due to falling or ejected objects X
1.3.4 Risks due to surfaces, edges or angles X
1.3.5 Risks related to combined machinery X
1.3.6 Risks related to variations in operating conditions X
1.3.7 Risks related to moving parts X
1.3.8 Choice of protection against risks arising from moving parts X
1.3.8.1 Moving transmission parts X
1.3.8.2 Moving parts involved in the process X
1.3.9 Risks of uncontrolled movements X
18