SCHUNK ROTA EP 380-127, Assembly And Operating Manual, Page: 43 / 73

02.00|0889073_ROTA TB-TBS-EP |en 43
1 Distributor ring 11 Locking screw
2 Profile gap 1.5 mm 12 Pilot-controlled check valve
3 Lubricating nipple 13 Piston cover
4 O-rings 14 Chuck body
5 Sealing disk 15 O-rings
6 Screw (for mounting chuck body on
cylinder)
16 Pneumatic connection
7 Cylindrical screw with hexagon socket 17 Cylinder
8 T-nut
18 Screw for mounting cylinder on flange
or spindle
9 Guide bushing 19 DIN 908 locking screw and copper seal
10 Piston 20 Profile seal
In order to prevent the chuck from being subjected to greater
loads, the centering mount can be replaced with one that has a
short taper and is suitable for direct mounting on the spindle nose
using a bayonet (DIN 55027) or Camlock (DIN 55029). The inner
and outer O-rings that are used for static sealing must be taken
into account if doing this. The guide bushing can only be mounted
with screws once this is done.