SCHUNK ROTA EP 380-127, Assembly And Operating Manual, Page: 51 / 73

Commissioning and maintenance
02.00|0889073_ROTA TB-TBS-EP |en 51
C1 76 H 215 V G 1/8”
C2 61 H1 - Weigh
t [kg]
0.760
(weight without
pressure gauge)
C3 95 J 74
C4 38 J1 110.5
Basic setting for oiler
Chuck type Air consumption/jaw
stroke at 6 bar
Clamping
strokes
Number of oil
drops
Oil quantity
ROTA TB 400 to
ROTA TB 1200
5 – 11 liters 10 approx. 2 - 4 approx. 24
mm 3
Flow rate characteristic curves and pressure drops
Cleaning and lubrication of the chuck
The chuck's accuracy, life span and ability to maintain an even
clamping force depend greatly on regular cleaning and sufficient
lubrication. Rust, scale, casting dust, and chips produce friction
and reduce motion.
As such, the chuck must be lubricated with LINOMAX special
grease paste from a grease gun at the three base jaw lubrication
nipples every 20 – 30 operating hours. The chuck must be actuated