manualshive.com logo in svg

SCHUNK PGN-plus-P, Assembly And Operating Manual

Share
Download
SCHUNK PGN-plus-P Assembly And Operating Manual Download Page 25

Assembly

10.00 | PGN-plus-P | Assembly- and Operating Manual | en | 389753

25

Item Mounting

PGN-plus-P

160

200

240

300

380

1

Thread in the main air
connections

G1/8 G1/8 G1/8 G1/4 G1/4

Max. depth of engagement
from locating surface [mm]

7

7

7

12

12

2

Thread in the air purge
connection

M5

M5

M5

M5

M5

Max. depth of engagement
from locating surface [mm]

6

6

6

6

6

Air purge connection

The air purge is used in order to make it more difficult for dirt and
dust to penetrate into the product and the guiding areas. With the
dust-tight variant (SD), it is necessary to use the air purge
connection in order to achieve the specified protection class.

5.3 Attaching additional structure

NOTE

With the dust-tight variant (SD), no additional structure can be
attached.

Gripper with additional structure

1

Gripper

4

Centering sleeve

2

Additional structure

5

Gripper fingers

3

Workpiece

For supporting things like workpieces, an additional structure can
be attached to the gripper.

Summary of Contents for PGN-plus-P

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands