Maintenance
42
13.00 | PGB | Assembly and Operating Manual | en | 389275
6 Maintenance
6.1 Notes
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
Replacement of the housing and base jaws
The base jaws and the guides in the housing are matched to each
other. To replace these parts, send the product to SCHUNK with a
repair order.
6.2 Maintenance interval
CAUTION
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Interval [Mio. cycles]
1
6.3 Lubricants/Lubrication points
SCHUNK recommends the lubricants listed.
Lubricant point
Lubricant
Metallic sliding surfaces
Toothgood 1
All seals
Sealgood 1
Bore hole at the piston
Sealgood 1
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
The guides in the housing can be re-lubricated as needed. Remove
the set-screw of the air purge connection and replace it with a
lubrication nipple.
