Assembly
4.2.4 Setting dimensions for magnetic switches
* Setting dimension I1, from product bottom edge (1) to front sensor (2)
The setting dimension applies for the following sensors:
• Programmable magnetic switch MMS 22-PI1
• Programmable magnetic switch MMS 22-PI2
• Programmable magnetic switch MMS-P 22
Size
l1* [mm]
l2** [mm]
64
8.8
17.7
80
18.7
27.6
100
21.0
29.9
125
22.9
31.8
* Dimen
sion l1
Bottom edge of the product to double arrow of the
sensor
** Dimen
sion l2
Bottom edge of the product to front edge of the
sensor
NOTE
The magnetic switch MMS 22-PI1 can be adjusted and taught in
two ways.
• "Standard mode" allows for quick installation on the T-nut
preset by SCHUNK in the groove or the defined setting
dimension "l1."
• In "Optimal Mode", the sensor identifies the optimal position in
the groove itself.
SCHUNK recommends "Optimal Mode" for setting the sensors.
25
13.00 | PGB | Assembly and Operating Manual | en | 389275
