Maintenance and care
38
01.00|1343374_MES3 / MEQ3 / MEW3 |en
•
During maintenance work on the quick-change pallet modules
or the air supply of the module height extension, new seals
must be fitted and lubricated with Renolit HLT 2 or a similar
grease before assembly.
•
Check the supply hose line to the pressure supply of the
module height extension for damage at regular intervals. The
supply hose line must be of the appropriate nominal hose
width and be completely inserted into the air connections and
securely clamped. Protect the supply hose line from kinking and
avoid tensile loads. After replacing the hose line, perform a leak
test.
CAUTION
Only polyurethane hydrolysis-resistant air hoses with
appropriate diameters are to be used.
Detaching thread on the clamping modules
The clamping modules installed in the module height extensions
have two detaching threads located opposite each other. This
allows, for example, the clamping modules to be more easily
removed from the module height extension for performing
maintenance work.
Summary of Contents for MEQ3 200-2
