SCHUNK MEQ3 200-2 Assembly And Operating Manual Download Page 8

Page: 8 / 49

Basic safety notes

01.00|1343374_MES3 / MEQ3 / MEW3 |en

Basic safety notes

Intended use

This product is intended solely for positioning and clamping
workpieces or clamping pallets on machine tools or other suitable
technical devices.

•

The product may only be used within the scope of its technical

data,

(



3, Page 19)

•

The product is intended for industrial and industry-oriented

use.

•

Appropriate use of the product includes compliance with all

instructions in this manual.

Not intended use

The product is not being used as intended if, for example:

•

It is used as a pressing tool, a toolholder, a load-handling device

or as lifting equipment.

•

It is used for turning applications over 100 rpm without

consulting SCHUNK.

•

It is used in working environments that are not permissible.

•

People work on machines or technical equipment that do not

comply with the EC Machinery Directive 2006/42/EC,
disregarding the applicable safety regulations.

•

The technical data specified by the manufacturer are exceeded

during usage.

Constructional changes

Implementation of structural changes

By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.

•

Structural changes should only be made with the written

approval of SCHUNK.

2.1

2.2

2.3

Summary of Contents for MEQ3 200-2


















































Search results

Summary of Contents for MEQ3 200-2

Reviews:

Related manuals for MEQ3 200-2

Brands by name

Popular brands

SCHUNK MEQ3 200-2, Assembly And Operating Manual

Search results

Summary of Contents for MEQ3 200-2

Reviews:

Related manuals for MEQ3 200-2

Brands by name

Popular brands