SCHUNK MEQ3 200-2, Assembly And Operating Manual

Page: 19 / 49

Technical data
01.00|1343374_MES3 / MEQ3 / MEW3 |en 19
Technical data
Type
designation ID Holding force*
(M10 / M12) Fmax ** Total
pull-down
force without
turbo FmaxT ***
Total pull-
down force
with turbo Weight
MES3 120-1 1337140 35 kN / 50 kN 8 kN 28 kN 16.3 kg
MES3 150-1 1337141 35 kN / 50 kN 8 kN 28 kN 17.9 kg
MES3 120-2 1337151 35 kN / 50 kN 8 kN 28 kN 21.6 kg
MES3 150-2 1337152 35 kN / 50 kN 8 kN 28 kN 24.9 kg
MEQ3 200-2 1337153 70 kN / 100 kN 16 kN 56 kN 54.8 kg
MEW3 45-4 1337154 70 kN / 100 kN per
clamping side 16 kN --- 51.6 kg
* Holding force when fastening the clamping pin with cylindrical
screw
– DIN EN ISO 4762/12.9
** Total pull-down force (total sum of pull-down forces of all the
clamping modules mounted in the module height extension)
*** Total pull-down force with TURBO function (total sum of pull-
down forces with TURBO of all the clamping modules mounted in
the module height extension)
Actuating pressure 6 bar
Repeat accuracy <0.005 mm
Installation position any
Operating temperature +15°C to +60°C
Required level of cleanliness IP 30 in accordance with DIN EN 60529
Noise emission [dB(A)] ≤70
Pressure medium Compressed air, compressed air quality according
to ISO 8573-1: 7:4:4
Protection class IP 67
The actuating pressure for the unlocking function must be set to at
least 5 bar up to a maximum of 6 bar.
The actuating pressure for the turbo function must not exceed 6
bar.
3