Assembly
20
01.00|1343374_MES3 / MEQ3 / MEW3 |en
Assembly
General Installation Notes
Pre-assembly measures
Lift the quick-change pallet system carefully out of the packaging
(e.g. using suitable lifting equipment). For larger module height
extensions, eye bolts or swiveling load brackets are supplied for
transport. The eye bolts or load brackets must be fastened in the
transport threads at the front or between the clamping modules
installed, depending on the design of the module height extension,
and removed again after assembly. Before assembly, the
interfaces (bottom of the module height extension, the clamping
pins and support areas of the clamping modules installed in the
clamping station) must be clean and free of any dirt or damage.
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Make sure, that no residual energy remains in the system.
CAUTION
Danger of injury due to sharp edges and rough or slippery
surfaces
•
Wear personal protective equipment, particularly protective
gloves.
4
4.1
Summary of Contents for MEQ3 200-2
