SCHUNK KGG 100-40, Assembly And Operating Manual

Page: 16 / 44

Assembly
16
15.00 | KGG 60-20 ... 140-60 | Assembly and Operating Manual | en | 389166
Ø
Check the evenness of the mounting surface, Mechanical
connection [
}
17].
Ø
Only open the required air connections (main connection or
direct connection),
Air connection [ } 18].
Ø
Connect the product via the hose-free direct connection.
✓
Use O-rings from the accessory pack.
✓
Seal main air connections which are not required with locking
screws.
Ø
OR: Connect compressed air lines to the main air
connections "A" and "B".
✓
Screw in air connections (plug connections).
OR: Screw on throttle valve in order to be able to perform
sufficient throttling and/or dampening.
Ø
Screw the product to the machine/system, Mechanical
connection [
}
17].
✓
If necessary, use appropriate connection elements (adapter
plates).
Ø
Secure the gripper fingers to the base jaws, Mechanical
connection [ } 17].
Ø
Connect the sensor, see assembly and operating manual of the
sensor.
Ø
Mount the sensor, Mounting the sensor [
}
20].