Assembly
20
15.00 | KGG 60-20 ... 140-60 | Assembly and Operating Manual | en | 389166
5.3 Installing the top jaws
The screws for mounting the top jaws must be provided by the
customer:
Screws for mounting the top jaws (to be provided by customer)
Type KGG
60
70
80
100
140
Screw (4x)
M3
M3
M4
M5
M5
The centering elements are included on delivery.
Centering elements for fastening the top jaws (included in the accessory kit)
Type KGG
60
70
80
100
140
Centering sleeve (4x)
Ø 5
Ø 5
Ø 6
Ø 8
Ø 8
5.4 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
