SCHUNK GSM-R 16, Assembly And Operating Manual

Page: 45 / 52

Maintenance and care
04.00 | GSM-R | Assembly and Operating Manual | en | 389106
45
Ø
Put the centering sleeve (108) in the upper housing (51) for
assembly with the lower housing (52).
Ø
Lubricate four O-rings (109) and place them into the provided
mirrored views in the lower housing (52).
Ø
Mount the upper housing with the lower housing and attach
both with screws (101). The screws (101) are to be tightened
"crosswise".
Ø
Lubricate two O-rings (109) and fit them into the upper housing
(51) into the appropriate counterbores.
Ø
Mount the centering sleeve (108) or cylindrical pin (107) onto
the upper housing (51).
8.11 Servicing and assembling the module
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
Grease/greasing areas [
}
36]
• Oil or grease bare external steel parts.
• Replace all wear parts / seals.
– Position of the wearing parts Drawings [
}
46]
– Seal kit Sealing kit [ } 7]
Assembly Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
Screw tightening torques [ } 37]