SCHUNK GSM-R 16, Assembly And Operating Manual

Page: 22 / 52

Assembly
22
04.00 | GSM-R | Assembly and Operating Manual | en | 389106
NOTE
In order to guarantee process reliability for monitoring with
magnetic switches, most especially the adapter plates and the
attachments located near the unit should be made of non-
ferromagnetic material. Otherwise, monitoring with magnetic
sensors could be impaired considerably
Accessories [
}
7].
NOTE
When monitoring with magnetic switches, a minimum distance of
10 mm is to be observed between the units in the event of the
assembly of several units next to each other
Accessories [
}
7].
5.2.2 Air connections
WARNING
Risk of injury during connection!
•
Switch off the energy supply.
NOTICE
The central air unit must be equipped with a maintenance unit
that is located as near as possible to the consumer.
NOTICE
If the end positions of the stroke and swivel movements are not
impact-free and bounce-free, the respective movements must
be adjusted with the exhaust throttle.
NOTICE
Observe the requirements for the air supply
Technical data [
}
16].