Assembly and settings
01.00 | ECG | Assembly and Operating Manual | en | 389769
29
5.2.8 Manual operating unit (optional)
5.2.8.1 Connect manual operating unit
DANGER
Danger of death from falling workpieces!
Unexpected actuation in parallel with manual operation can lead
to a loss of the workpiece and serious injuries.
•
Exclude parallel actuation via the higher-level controller for
the duration of manual operation.
Ø
De-energize the product or system.
Ø
Open the product cover by removing the fastening screws on
the cover.
Ø
Terminal X2: Connect manual operating unit
Note ECG-R:
To do this, disconnect the existing cable
connection between X1 on the supplementary printed circuit
board and terminal X2.
Ø
Close the product cover and secure it with the fastening screws.
5.2.8.2 Setting up the holding process with the manual operating unit
NOTE
The manual operating unit makes it easy to set up the holding
process. Permanent operation of the magnetic gripper using the
manual operating unit is not permissible.
Manual operating unit
