1.4
Exchangeable heating plates
For the press there are several heating plates available.
The instruction for the exchange you can find in chapter 3.7.
1. Heating plate 40 x 50 cm
2. Heating plate 50 x 80 cm
3. Heating plate 70 x 90 cm
4. Heating plate 60 x 100 cm
5. Heating plate 70 x 100 cm
1.5
Exchangeable base plates
For the press there are several baseplates available.
The instruction for the exchange you can find in chapter 3.8.
1. Working plate 40 x 50 cm
2. Working plate 50 x 80 cm
3. Working plate 70 x 90 cm
4. Working plate 60 x 100 cm
5. Working plate 70 x 100 cm
1.6
Safety arrangements of the press
The Big-O-Lite pneu is equipped with different safety arrangements, to make a safe usage possible.
Main fuse 16A
The main fuse 16A is located in the lower of the heat press. In case of an overcharge, the main fuse prevents the heat press from getting
damaged. Once the fuse was activated, it has to be replaced. The instruction for replacing the main fuse can be found in chapter 4.3
Thermal fuse
The thermal fuse is placed directly on the heating plate and it stops the power supply if the temperature exceeds 260°C. If this fuse is
activated, the temperature sinks down to 90°C. After that the power supply gets activated again and the temperature of the heating plate
rises and you can work with the press again. Certainly you need to install a new thermal fuse within the next days. The instruction for the
replacement of the thermal fuse can be found in chapter 4.9.
Automatic switch-off
If the press doesn't get opened within 15 seconds after the pressing progress, the heating element switches off automatically, to avoid fire
danger.
Safety valve
The safety valve 6.0 bar is placed at the pressure pipe in the press. I the pressure should exceed 6.0 bar, the valve will be activated
automatically.
Emergency shut-off
In dangerous situations you may just push the red button at the front of the press. The press will open automatically. To resume your work
pull the button to you.
Version 16.01 4 / 18
Summary of Contents for Big-O-Lite pneu plus
Page 1: ...Instruction manual Version 16 01 Heat press Big O Lite pneu plus Version 16 01 1 18...
Page 7: ...3 Working with the heat press 3 1 Programming of electronic devices Version 16 01 7 18...
Page 16: ...4 10 Connection diagram Version 16 01 16 18...
Page 17: ...4 11 Controlling of the pneumatics Version 16 01 17 18...