Schulze Big-O-Lite pneu plus, Instruction Manual

Page: 11 / 18

3.8 Exchanging the heating plate
To exchange the heating plate, the press must be disconnected from electricity and cold.
Now disconnect the spiral tube plug of the heating plate. (photos 1-2) .
Loosen fixation screw with a wrench (photo 3) . The heating plate must be placed exactly on the lower plate. Large heating plates have
handles for transport. They should be installed (photos 4-6) and the heating plate must be carefully put on soft surface so as not to
damage the teflon. Then take the new heating plate and tighten it with the wrench. Connect the heating plate with the press.
The heating plate can not be turned.
3.9 Exchanging the base plate
To replace the lower plate the drawer with the plate must be pulled out (photo 1) , If you want to exchange the base plate you have to
loosen the fixation screw (photo 2) .
After exchanging the base plate, you have to tighten the fixation screws again (the pointed sides have to face up).
Version 16.01 11 / 18