Schulthess WT14 EFH K, Installation Instructions Manual

Page: 36 / 44

36
EN
Washer-Dryer tower
In order to save space (installation
space), you can place your dryer on top
of a washing machine (washer-dryer
tower). It is absolutely imperative not
to mount a washing machine on a
dryer, risk of falling.
You can obtain the appropriate parts as
a construction kit from your specialist
dealer or our customer service. The
installation must be carried out by a
specialised electrician.
►
Washer-dryer tower staking kit, grey
Order No: 510 64
Warning
Risk of tipping!
It is absolutely imperative not to mount
a washing machine on a dryer.
Water outlet
The condensed water collects in the
condensate pan and is pumped into
the drain pipe from there.
The drainage hose is fastened to the
condensate pan on the back of the
dryer and may be directed to the left or
to the right.
Dimensions condensate drain hose:
ø 7 / 13 x 1900 mm
►
The waste water hose may be con-
ducted in the siphon of a sink unit or
another waste pipe.
Important
Check that there is no tension on the
drainage hose.
Strong tension may kink the hose,
which prevents the condensation
water from being pumped out.
Ensure that the pump must not pump
higher than 100 cm and that no waste
water can ran back into the condensa-
tion pan.
If the distance to the drain at the
customer’s is too big, you can obtain
an extension set from your specialist
dealer or customer service:
►
Drain hose extension 2 m
Order no: 510 23