OPERATION
SRW1000 08/17
Operation Section 4-31
© 2017 Alamo Group Inc.
OPERA
T
ION
If the tractor’s hydraulic pump is not independent of the tractor PTO, or if the tractor PTO has to be run to have
hydraulic power, disconnect the mower driveline from the tractor PTO output shaft. Secure the driveline to the
mower deck to prevent driveline damage or loss during transport.
15.1 Transporting on Public Roadways
Extreme caution should be used when transporting the tractor and implement on public roadways. The tractor
must be equipped with all required safety warning features including a SMV emblem and flashing warning
lights to alert drivers of the tractor’s presence. Remember that roadways are primarily designed for automotive
drivers and most drivers will not be looking out for you, therefore, you must look out for them. Check your side
view mirrors frequently and remember that vehicles will approach quickly because of the tractor’s slower
speed. Be extremely cautious when the piece of equipment that you are towing is wider than the tractor tire
width and/or extends beyond your lane of the road.
In wet conditions where there is a likelihood of material collecting on the Implement, make
certain that this material is removed before traveling on public roadways.
(STL-7)
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
(SG-10)
Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations.
(SG-6
)
The SMV (Slow-Moving Vehicle) emblem is
universal symbol used to alert drivers of the
presence of equipment traveling on roadways at a
slow speed. SMV signs are a triangular bright
orange with reflective red trim for both easy day
and night visibility. Make sure the SMV sign is
clean and visible from the rear of the unit before
transporting the tractor and implement on a public
roadway. Replace the SMV emblem if faded,
damaged, or no longer reflective.
OPS-U- 0020
Summary of Contents for SRW1000
