Schulte FX-530 Operator'S Manual Download Page 82

Page: 82 / 170

OPERATION

FX-530 06/21

Operation Section 4-22

OPERA

TION

•

Ensure that the mower is equipped and

secured with wing transport locks.

•

Check the condition of the wing hinge pins.

•

Check the condition of the mower axle

suspension spring.

•

Inspect mower tire condition, wheel bearings,

and lug nut torque.

OPS-R-0014_M

•

Inspect blades and blade bolts for looseness

and excessive wear. Make sure the mower is

securely blocked up before crawling beneath.

Replace damaged, worn, and missing blades

as complete sets to maintain rotary balance.

•

Ensure carrier hub nuts are tightened with the

cotter pin inserted and spread. Check

maintenance section for proper torque.

•

Inspect the condition of the deck skid shoes

and the skid shoe attaching hardware.

OPS-R-

0012_A

Summary of Contents for FX-530











































































































































































Search results

Summary of Contents for FX-530

Reviews:

Related manuals for FX-530

Brands by name

Popular brands

Schulte FX-530, Operator'S Manual

Search results

Summary of Contents for FX-530

Reviews:

Related manuals for FX-530

Brands by name

Popular brands