Bedienungsanleitung/Operating Instructions
schuett phoenix II Sicherheits-Bunsenbrenner/Safety Bunsen Burner
Seite/page 24
Settings (standard, accu)
Go to the operating mode “Settings“.
Move the joystick downwards and choose the corresponding setup level.
Setup Level 1 “Language“
1. Move the joystick to the right or left until the centre of the display shows the flag
of your favoured language.
2. Confirm the setting by shortly pressing the centre of the joystick,
lights up in
green colour.
Setup Level 2 “Automatic shut down”
Choose the time after which the device automatically switches off, if it is not
operated.
1.
You may choose between 15 min, 30 min, 60 min or 120 min.
Move the joystick to the right (+) or left (-) to set the time.
2.
Confirm the setting by shortly pressing the centre of the joystick,
lights up in
green colour.
Setup Level 3 “Reset to default settings”
This resets all settings to standard values (see technical data).
1.
Move the joystick to the right, if you wish to reset to default settings or move to
the left. The corresponding arrow is highlighted in green colour.
2.
Confirm the setting by shortly pressing the centre of the joystick, lights up in
green colour.
Setup Level 4 “Softwareversion”
In case of a defect of the burner, please mention the two version numbers stated in
this setup level.
