Varistar LHX 3
60130-626 Revision 001
8
See also point 4.
If the water temperature falls below 16 °C the formation of condensation should be anticipated
4. Water
Quality
To ensure trouble-free operation of the LHX 3 the following requirements for the water must be
observed (see also VDE 3803):
- Electrical conductivity:
25 mS/m < 220 mS/m at 25 °C
- Hydrogen concentration:
7.5 ... 8.5 (pH value) at 20 °C
-
Chloride:
<
200
g/m³
- Total hardness:
< 60°dH
- Colonial units:
< 10.000 KBE/ml
-
Appearance: clear,
sediment-free
-
Colour:
clear
5. Transport and Storage
Any damage found on unpacking should be communicated to the carrier and the transport
insurer immediately.
During transport, ambient temperatures of between -25 °C and 70 °C and a relative humidity of
between 5 and 95 % are generally permissible.
After storage at temperatures below 10 °C, sufficient time should be allowed
for acclimatisation before switching on, as condensation water may have formed.
The LHX 3 must only be transported without water.
If the unit is to be stored or transported in ambient temperatures of less than 0 °C, special
measures must be taken to prevent damage caused by freezing.
