Varistar LHX 3
60130-626 Revision 001
5
2.
Regulations / Safety Notices
The design and construction of the LHX 3 are in compliance with all applicable EC guidelines.
(See section 12, EC Declaration of Conformity)
In the installation and operation of the LHX 3 the following regulations and safety notices must
be observed:
ANY WORK ON THE LHX 3 MAY ONLY BE CARRIED OUT BY QUALIFIED PERSONNEL
ACCIDENT PREVENTION REGULATIONS MUST BE OBSERVED
DO NOT STAND UNDER THE LOAD DURING RAISING AND LOWERING OF THE LHX 3
.
KEEP OUT OF THE DANGER AREA.
THE LHX 3 MUST BE PROPERLY SECURED TO AVOID RISK OF TIPPING.
NO SAFETY FEATURE MAY BE DISABLED OR BYPASSED.
THE APPLICABLE VDE, EN AND IEC STANDARDS MUST BE OBSERVED IN THE
ELECTRICAL FITTING AND CONNECTION OF THE LHX 3. IN ADDITION, THE TECHNICAL
SPECIFICATIONS FOR CONNECTION TO THE ELECTRICAL SUPPLY UTILITY COMPANY
MUST BE OBSERVED
BEFORE COMMENCING ANY WORK ON THE LHX 3, THE UNIT MUST BE ISOLATED
FROM THE POWER SUPPLY
The national regulations of the country in which the unit is installed must be observed
The entire water circuit must be monitored for any incompatibility or intolerance of
materials
The cooling water must be free of any substances that may cause mineral deposits or
corrosion!
The water quality must conform to the values stated in section 4
