Varistar LHX 3
60130-626 Revision 001
10
6.2
Removing and rotating the LHX 3 heat-exchanger cassette to accept water supply
from the front instead of the rear
(At delivery, water connections are normally configured for supply from the rear)
In order to change the water connection points from the rear to the front, first remove the heat
exchanger cassette. Also remove the transport securing bracket (Fig. 3)
Now you can pull the heat-exchanger cassette out of the base unit (Fig. 4) and change the
direction of water connection (select either from in front or from the rear).
Next, loosen the screws on both handles and fit them to the opposite side of the heat exchanger
facing outward (Figs. 5 and 6).
3
4
6
5
