Varistar LHX 3
60130-626 Revision 001
11
Note: Please use the plastic studs to close the drilled holes.
Finally, reinsert the now reversed heat exchanger into the base unit of the LHX 3 and screw the
transport securing bracket back in place (Figs. 7 and 8).
Should problems arise from the repositioning of the handles on the heat exchanger, please
consult the Schroff service department for assistance.
For contact information see page 2.
6.3
Removing the Fan Unit
Caution! While removing or working on the fan
unit please first remove the mains plug from the
power supply (see safety regulations, page 5).
To remove the LHX 3 fan unit, first loosen the
four large top bolts and six smaller bolts for the
fan unit (Fig. 9).
Remove earthing cables from the top plate and
fan unit.
6.4 Water
Supply
7
8
9
