Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.015
Page 4
2 Application range
The
SCHMIDT
®
LED Measured Value Display MD 10.015
(article no.:
527330 and 528250) is used to display measured values which are trans-
mitted by up to two sensors via an analog signal (current or voltage).
The supply voltage of the sensors can be obtained from the LED display.
The sum function is used to determine the flow volume. In bidirectional
mode, a bidirectional flow signal can be generated from two unidirectional
flow sensors. Switching points for two alarm outputs can be derived from
the input signals and the quantity. The galvanically isolated analog output
allows the scalable output of the display values.
The
SCHMIDT
®
LED Measured Value Display MD 10.015
can be used
for
SCHMIDT
®
flow sensors as well as for other sensors (e.g. pressure,
temperature, humidity) which are equipped with standard analog outputs.
The
SCHMIDT
®
LED Measured Value Display MD 10.015
is designed
for the use inside closed rooms and is not suitable for outdoor use (risk of
condensation on electronic parts). Moreover, the use in safety relevant
applications are not allowed.
3 Mounting instructions
Dimensions
Figure 1: Dimensions of housing
13
4
10
6
100
90
10
0
90
60
27
30
6,3
4,9
max. 120
