Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.015
Page 19
.
Start value for measuring range
“Sensor 1”:
(e.g.: 0 ... 200 m³/h
→
0
)
Modification by pressing arrow keys
.
End value for measuring range
“Sensor 1”:
(e.g.: 0 ... 200 m³/h
→ 20
0
)
Modification by pressing arrow keys
Selection of signal
mode “Sensor 2”:
/
(mA) /
(V) /
(mA)
Modification by pressing arrow keys
.
Decimal places of measured value
“Sensor 2”:
. /
.
/
.
/
.
/
.
(Only if input
“Sensor 2” is activated)
Modification by pressing arrow keys
.
Start value for measuring range
“Sensor 2”:
(e.g.: -40 ... +85 °C
→
-40.00
)
(Only if input “Sensor 2” is activated)
Modification by pressing arrow keys
.
End va
lue for the measuring range of “Sensor 2”:
(e.g.: -40 ... +85 °C
→
85.00
)
(Only if input “Sensor 2” is activated)
Modification by pressing arrow keys
Signal from which the volume will be calculated:
(measured value
“Sensor 1”) /
(difference:
“Sensor 1” – “Sensor 2”) /
(sum:
“Sensor 1” + “Sensor 2”)
(not available in operating mode
“Bidirectional”)
Modification by pressing arrow keys
