Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.015
Page 21
Signal source for alarm output 1:
(alarm output deactivated) /
(measured value
“Sensor 1”) /
(measured value
“Sensor 2”) /
(measured value in mode
“Bidirectional”) /
(measured volume)
Modification by pressing arrow keys
Switching behaviour alarm output 1:
(switches when switching point is exceeded)
(switches when dropping under switching point)
Modification by pressing arrow keys
.
Switching point alarm output 1:
Modification by pressing arrow keys
.
Hysteresis alarm output 1 (four digits)
Modification by pressing arrow keys
.
.
Response delay alarm output 1:
.
.
...
.
.
(h.mm.ss)
Modification by pressing arrow keys
.
.
Release delay alarm output 1:
.
.
...
.
.
(h.mm.ss)
Modification by pressing arrow keys
Parameterization of alarm output 2:
Identical to alarm output 1 (menu items
to
)
