Schmid & Wezel
D75433 Maulbronn,
Page/ Seite
10/ 19
Version/ Ausführung
04.2009
according to the applicable regulations. Never
dispose of hydraulic fluid through the public
sewage system.
6.3.2 Sharpening of blades
Improperly sharpened cutter blades lead to low
production rates and an increased risk of injury to
the operator.
We are therefore providing a blade sharpening
service for customers. Contact your local
authorised repair shop or the Schmid & Wezel
customer service department.
If the cutter is used according to the instructions,
the blades must normally not be resharpened.
If sharpening is however necessary, use a
conventional grinder and ensure that only little
material is ground off.
6.4 Repairs by S&W customer
service technicians
All repairs must be completed by specialist
technicians.
S&W operates an extensive after-sales service
network. Contact your local authorized repair
shop or the Schmid & Wezel customer service
department for more information on our
services.
On request, we provide spare parts lists for
repair shops with specialist technicians.
After completion of the repair work, the gear
system must be lubricated again for life!
7. Transport and storage
The cutter must be stored in a dry, well-ventilated
room.
For transport, clean the machine as described in
chapter 6.1.2 "Cleaning" (page 9), and dry it
Do not use any force when
operating or repairing the
equipment as parts could
otherwise be damaged! Use only
original EFA spare parts!
Before carrying out any repair
work, disconnect the cutter from
the power supply!
thoroughly.
During transport, protect the cutter against
damage from impacts, etc.
8. Disposal
For proper disposal, return your equipment to
S&W.
