Schmid & Wezel
D75433 Maulbronn,
Page/ Seite
2/ 19
Version/ Ausführung
04.2009
1. Application, scope of
delivery and accessories
Important notes!
This manual has been specifically compiled for
machine operators. Keep it near the machine for
future reference!
The hook cutter may only be operated
for the intended purpose, with due care as
regards safety, and if the equipment is in
proper working order
if all safety devices are properly mounted
according to the safety instructions
after instruction of the operating personnel,
who must also have read and understood the
instructions in chapter 2 "Safety instructions"
(page 3) and chapter 3 "Commissioning and
operational safety" (page 3).
This is necessary in order to prevent incorrect
operation and to enable operators to assess
potential risks accurately.
1.1 Symbols used in this manual
Danger:
Information:
Never reach into the operating
range of the cutting blades, as
there is a risk of
dismemberment!
Always wear goggles or other
effective eye protection!
Proceed with extreme caution. In the
event of incorrect operation, there is a
risk of injury to operating staff and
other persons. There is also a risk of
damage to the machine.
This symbol highlights sections in the
text containing important information
and useful hints.
1.2 Proper use
The hook cutter is designed for the cutting of
non-frozen or partially frozen meat (temperature
approx. 5 °C).
The hook cutter is particularly useful for the
cutting of feet and behinds. It can also be used
for the cutting off of paws at the joint. Cut only at
joints to protect the device against damage from
excessive wear.
It is suitable for cutting and breaking in large and
medium-sized meat and poultry processing plants.
The machine is not designed for any other use. If
you wish to use the equipment for other
purposes, first consult Schmid & Wezel GmbH &
Co (S&W).
If the machine is used for any other purposes,
please note that there is a greater risk of serious
injury and increased wear to machine parts. The
operator shall be solely liable for any damage
arising from improper use of the equipment.
1.2.1 Residual risks
As the hook cutter is designed for the cutting of
animals, there is a risk of serious injury to
persons. For proper use, the clearance between
the cutter blades may not be reduced. It is
therefore possible to place the blades around the
neck, upper arm or shoulder joint of a person and
to release the cutter. If handled improperly or
without due care, persons might even be killed
instantly, or die as a consequence of serious
blood loss. It is therefore imperative that the
cutter is handled properly and according to the
instructions in this manual.
Manufacturer’s declaration
The machine cannot generate pressure. Pressure
build-up occurs only in conjunction with the
connected pressure generator and hose
connections. The machine may only be
commissioned if all requirements of the directives
and regulations governing pressurised vessels are
fulfilled.
The machine is designed for a pressure of 120
bar. The pressure volume in the hook cutter, as
well as in the pressure generator and the supply
lines is
(estimate value). Such
devices must generally meet the requirements of
the Pressure Vessel Directive 97/23/EC and
related diagrams: Due to the sturdy design
ensuring great dimensional stability and strength,
p V
240
>
⋅
