Operating Manual
V
ACU
M
ASTER
Multi-Serie
Chapter 5
Operation
J. Schmalz GmbH
Aacher Straße 29
D - 72293 Glatten
Tel +49 +7443 / 2403 - 0
Fax +49 +7443 / 2403 - 259
http://www.schmalz.de
e-mail: [email protected]
BA 30.30.01.00221-00
Status 03.2013
Page 13/18
5.4 Releasing Loads
Lower the load to a safe and vacant, level surface. When placing the load
vertically, make sure it is properly guided and cannot slip away or tip over.
Danger
Press both "Release" buttons (3). The load detaches itself.
Keep hands away from the load when activating a "Release" button.
Crushing hazard!
Hold both "Release" buttons (3) and raise the lifting device.
5.5 Switch on / off the
back suction pad
row
To remove boards from racks the back suction pad row can be switch on an off
with the ball valve (only
M
ULTI
400/300-90°-8
)
.
Attention
: only switch on and off the back suction pad row in no-load condition.
Warning
Deactivating the back suction pad row reduces the load carrying capacity of
the device by the half
Front suction pad row
Back suction pad row
ball valve
5.6 Moving the Lifting
Device with the
Chain Hoist
Do not jerkily drive the lifting device because the device with the sucked on load
could get in rotation or pendulum motion.
Accident hazard !
1
2
3